GeoSafi is a synergic blend of selectively adopted and highly efficient micro-organisms specifically formulated for accelerated degradation of difficult to digest organic compounds. The ready to use dry concentrated formulation provides improved waste degradation in septic systems, municipal and light industrial waste treatment plants, vault and pit toilets, composting toilets, sewage pits and lagoons.
CHARACTERISTICS: 100 % natural vegetative bacteria Count: CFU per gram Pale brown coloured free flowing powder Stable at room temperature for 2 years (Powders and solids are more stable and less susceptible to contamination. It takes a considerable amount of moisture to activate the product.) Parameters for Biological Application: Rapid growth & reproduction of these bacteria must have proper environment & should have the following characteristics: 1. A water medium containing food (organic waste). 2. Aeration or Dissolved oxygen (for the aerobic types that require it) in sufficient quantities. 3. pH between 6.5 to 8.0 not too acid nor too alkaline 4. Temperature between 30°C and 60°C.
BENEFITS •Grow and reproduce quickly and readily in the environmental conditions found in the waste disposal systems. •Degrades wide range of organic waste without causing odours or noxious gas. •Enhances BOD/COD removal •Reduces TDS & sludge build-up. •Reduces hydrogen sulfide, Ammonia •Contains no chemicals •Increases system efficiency •Effective and easy to use & reduces labour time •Non –pathogenic not cause any disease to Humans & Animals. •Restores good water quality. •Safe to Environment
APPLICATION DIRECTIONS Procedure for Charging: 1.Add 1kg as suggested by the manufacturer in 10 litre bucket& fill with fresh water because dissolved oxygen content in fresh water is higher than in waste water for charging the bacteria. 2.The retention time of bacteria in the bucket must be 30- 45 minutes. 3.Stir well at regular intervals of 10 minutes must be done in the bucket
Dosing: 1.Before dosing pH of the effluent at the point of dosing should be pH 6.5 to 8.2 2.At the time of dosing stir the bucket well & spread it evenly as much as possible in the tank. 3.Plant should be properly analysed regularly for the parameters viz., pH, BOD, COD, MLSS, TDS and Odour of Aeration Tank.
Stage of Dosing 1.When used for the first time at any plant shock dosage is provided. 2.The amount of usage while shock dosing will be double the quantity of maintenance dose. 3.During this dosage is a crucial for monitoring & any wrong symptoms noticed should be informed to technical team at any time.
Maintenance Dose 1.If shock dose is successfully completed then maintenance dose is carried out. 2.After completion of maintenance dose a month report has to be given to our technical team for best result of the product